Talking Architecture & Design Podcast (Episode 50:) - Troy Creighton talks about making building materials in Australia, water sustainability and smart drains... Listen Now
My shortlist (0 item)
    Sculptform

    Fintrax façade system

    Woodform Architectural’s aluminium Fintrax façade system was specifically designed and engineered for large-scale external facades.  Developed to meet increasing requests by designers for a larger, fin-like profiles; Woodform collaborated with the façade engineers at Inhabit Group to develop the concept design of the Fintrax system.

    How does Fintrax work?

    1. You choose your sequence;

    2. We stack the fins cut to exact length, install endcaps and pre-vetif clips onto rail in our factory to your desired sequence and spacing;

    3. Fintrax is then delivered to site as a flat place;

    4. Installers secure Fintrax rail to substrate (perpendicular to the fin orientation-typically two per standard 3.0m);

    5. Fins are lifted up and clicked into position.

    The Fintrax engineering edge

    • Aluminium clip-and-rail system
    • Designed to support feature fins for use on external facades
    • Suitable for heights of up to 25 metres above ground within Region A
    • Designed to meet relevant Australian standards including AS/NZS1170.0/.1/.2 and AS/NZS 1664.1.
    • Suitable for multi-span applications
    • Maximum support structure limited to 1500mm
    • Capable of supporting aluminium fins of varying profiles up to 300mm deep and 150mm wide

    Finishes

    Fintrax fins are available in a large range of Power coat, Anodised and Woodgrain finishes.

    Contact Sculptform
    Please correct the errors and try again.

    Brochures

    Contact Sculptform

    CONTACT

    You May Also Like:


    Back to Top
    a